Bostitch 2.8 x 75mm 28° Stick Nail Ring Shank Galvanised (2000) - BOSS280R75G8
inc VAT
Bostitch BOSS280R75G8 Details
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments.
28° Collation Angle
Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out.
(Remember only tools fitted with sequential trip should be used when working up a ladder).
Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.
Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.
Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.
Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.
Gauge/Diameter (mm) 2.8
Length 75
28° Collation Angle
SKU S280R75G8
Profile RING
Finish G8
Description STICK NAIL 2.80-75 RING GAL8 2M
Qty per box 2000
Will also fit the N80SB, FW28WW-E, N100S
| SKU | BOSS280R75G8 |
|---|---|
| Manufacturer | Bostitch |
| EAN | 5902013010425 |
| MPN | S280R75G8 |
| Brand | Bostitch |
| Finish | Galvanised |
| Diameter | 2.8mm |
| Size | 2.8x75mm |
| Length | 75mm |
TRADING DEPOT DELIVERY CHARGES AND OPTIONS
Trading Depot currently only offer delivery to the UK.
All small stocked items are delivered direct to the customer from Trading Depot unless ordered with larger items, or FREE Click & Collect from Trading Depot is selected at the checkout.
| Region | Delivery Service | Delivery Cost (Inc. VAT) |
|---|---|---|
| UK Mainland (England, Wales, Scotland) | Trading Depot Standard Delivery (2-4 Working Days) | £7.95 |
| UK Scottish Highlands & Islands | Trading Depot Standard Delivery (2-4 Working Days) | £16 |
| UK Jersey, UK Guernsey, UK Isle of Man, UK Isle of Wight, UK Isle of Scilly | Trading Depot Standard Delivery (2-4 Working Days) | £25 |
Special Order Items: Please note some special order items have longer lead times which are clearly indicated on the product page.
DELIVERY EXCLUSIONS
Unfortunately delivery to the following UK regions are not offered at checkout. If you would like to place an order for any regions listed below, then please contact customer services.
Excluded Regions: UK Northern Ireland.
FREE CLICK & COLLECT FROM TRADING DEPOT
FREE click and collect from Trading Depot’s warehouse in Maidenhead is also available. Simply select this option at the checkout and your items will be ready to collect in 1 – 2 working days (providing the item is in stock at the time the order is placed). You will be contacted when your order is ready to collect.
FINAL SHIPPING COST DETAILS
The delivery options on this page relates to this product only and may not be available if other items are added to your basket which are shipped from different suppliers. Only one delivery charge is made per order and the highest will normally take precedence. This is calculated based on the items in your basket at checkout.
DELIVERY WORKING DAYS & BANK HOLIDAYS
Deliveries are generally only made on working days. Working day refers to Monday to Friday and excludes weekends and Bank Holidays.
RETURNS
We offer a no quibble 14 day returns policy on all goods supplied, subject to a few minor exceptions. Returned products must be in the original packaging. View full details on our returns policy along with how to request a return.
RESTOCKING FEE
Returns for this item may be subject to a re-stocking fee.
Important Disclaimer: All delivery dates are provided as a guide and are not 'guaranteed'. We try to keep our customers as informed as possible if there are any changes or delays with delivery. Trading Depot will not be liable for any costs incurred by any such delays waiting for goods. Trading Depot advises strongly against booking Tradesmen until after goods are safely received and checked for this exact reason.