VFMi Storage Heater Features
- Ideal for offices, hotels, community rooms, halls and larger homes.
- Loadings from 3.4 to 6.9kW.
- Frost protection setting.
- Manually adjustable input charge control.
- Controls conveniently positioned on the top right-hand side of the heater.
- Simplified assembly – supplied with secure wall fixings.
- Optional direct acting elements available.
- Accessory feet available for use on uneven surfaces or thick carpets (Only applicable when heater is fixed to wall).
- Suitable for use on all off-peak tariffs.
- Highly accurate thermostat for close control over retained heat.
1 Storage Core : Material: High density bonded magnesite bricks.
2 Heating Elements : Type: Incoloy sheathed, 3 elements per heater.
3 Thermal Insulation : Front and Rear Panels
- – microporous silica.
- Top – microporous silica.
- Base and sides – vermiculite.
4 Supply Connection : Located at right hand side to rear of heater – accessible by removal of side panel assembly. Note – Heat resistant cable required for connection to heater.
5 Installation : A secure wall fixing is required for all heaters with suitable connection to the fixed wiring of the premises.
Construction Details : Galvanised sheet steel base, mounted on pressed steel feet. Side panels, front panel/air outlet grille assembly and inner skin removable for brick loading.
1 Charge Controller : Type: Hydraulic, manually adjustable from zero charge to fully charged condition.
2 Thermal Safety Device : Type: Bi-metal – automatic reset.
3 Output Control : Type: Integral room temperature sensing hydraulic thermostat fitted at installation stage. Accurate to ±1°C. Temperature range approximately 5°C to 30°C. On/Off switch for fan. On/Off switch with neon for direct acting heating element (option).
IP Rating : N/A.
Electrical Supply : 240V single phase (415V 3 phase option may be selected on installation).
1 Case Assembly
- VFM24i – approx. weight 44kg.
- VFM32i – approx. weight 51kg.
- VFM40i – approx. weight 57kg.
- VFM48i – approx. weight 63kg.
2 Storage Bricks : Packed separately in packs of 3 (see table for weight of product with bricks). Pack Part No. 007781 approx. weight 16.7kg.
Finish : Front panel, top panel, side panels – RAL9016. – Traffic White. Grille – Birch Grey.
- Feet: Part No. SHF25i.
- Direct Acting Elements for retro – fit or on heater installation.
- Blanking Plugs for Control Locking.
- (Part No. 9534)
|Performance Input Rating||3.4kW||4.6kW||5.7kW||6.9kW|
|Charge Acceptance 7 hr||24kWh||32kWh||40kWh||48kWh|
|Heating Elements/FansNo. of elements/rating (Off-peak supply)||3 x 1130W||3 x 1530W||3 x 1900W||3 x 2300W|
|Fan rating (On-peak supply)||15W||15W||25W||25W|
|Depth (inc. 35mm wall spacer)||285mm||285mm||285mm||285mm|
|No. of storage bricks||18||24||30||36|
|Suitable for Fan Storage
|zHi 150E||1.5 kW|
|zHi 200E||2.0 kW|