Energy saving features
- Electronic thermostatic control, providing room temperature stability to +/-0.3°C.
- Range of optional plug-in electronic timer modules, including:
– 24 hour digital timer
– Single-zone pilot wire programmer
– Runback timer
- Compatible with Dimplex 4-zone, wall mounted pilot wire and mains borne signalling multi-heater programmers.
- Elegant glass front finish in black or white.
- Convected heat for rapid warm-up.
- Virtually noiseless operation.
- Compatible with a number of colour complementary Dimplex plug-in controllers.
- Pre-set background temperature at 5oC.*
- Splash-proof (IPX4) rated, for use in bathroom or wet areas.* When connected to a programming unit supporting setback feature
1 Thermostat control
User selection of room temperature from 5oC (frost protection) to 30°C using slider control. Slider can be locked in position if required.
2 Power controls and indicators
Soft-touch on/off button, together with indicators showing when power to heater is on and when element is operating.
3 Plug-in control modules (optional)
A range of optional plug-in control modules, which can be removed from the heater for easy programming, providing the flexibility to meet a wide range of control specifications:
24-hour Digital Timer (RX24Ti, RX24TiB)
1 timer required per heater. Provides 24 hour programmable on/off control.
Single Zone, Pilot Wire Programmer (RXPW1)
Controls up to 10 slavae heaters linked via pilot wire. Provides 7 day programmable on/off control.
Runback Timer (RXRBTi)
1 timer required per heater. Provides installer programmable runback time upto 4 hours (in 30 min increments).
Can be locked into heater.
Choice of two finishes to match panel heater:
RXRBTi – White, RXRBTiB – Black
|Model No.||Colour||Loading||Height||Width (A)||Depth (B)||X||X1||Weight|
- Compatible with Dimplex 4-zone pilot wire and mains borne signalling controller. (RX9913 receivers required for MBS system)
- Electronic type, accurate to +/- 0.3°C.
- Compact, finned, mineral-filled sheathed type, providing virtually noiseless operation.
- Auto reset type.
- Durable epoxy-polyester powder coated steel casing, with upward facing grille. Temperature resistant PBT thermoplastic moulded parts.
- White front, back, grille and plastic parts.
- Detachable wall mounting bracket.
- 1.2m, 4 core cable (live, neutral, earth, pilot) supplied fitted to each heater.
- Splashproof IPX4.