Question: Does a sewage plant have to meet a UK Standard?
Answer: The ENsign plant has been tested to EN12566:3-2005 this is highest testing standard for European testing. The high test results mean the ENsign can discharge direct to a ditch, watercourse or percolation bed.
Question: Why should I buy the Marsh Ensign sewage treatment plant? and does it smell and is it noisy?
Answer: The ENsign Sewage plant is manufactured in the United Kingdom. The plant is odourless and operates almost silently and is backed with a 25 year structural guarantee. The ENsign Sewage plant is extremely energy efficient and normally only requires 30 minutes of annual maintenance. The six person ENsign Sewage plant is extremely strong and is only 1.95m in depth with an inlet invert of 500mm, this design reduces both the time and cost of installation, in normal ground conditions the unit only requires a pea-shingle surround.
Question: What is a pumped outlet?
Answer: A pump is fitted into the Marsh ENsign plant where there is no natural fall of gravity from the outlet pipe. The pump allows the effluent to be pumped to a higher level. We recommend the compressor is sited externally when a pump is fitted, together with a high level alarm. The Marsh ENsign design means that the pump is easy to fit and accessible and means a separate pump chamber does not need to be installed saving both money and time.
Question: I have been told you cannot fit a sewage plant into my driveway.
Answer: You can fit a Marsh ENsign plant, the plant can be adapted, so if required it can be installed in a vehicle driveway, please contact by phone or email for more details.
Question: I need a treatment plant for my holiday home, it will not be used all the time, and will it smell?
Answer: No, The ENsign is designed with an internal recycling-system, this means the ENsign plant is ideal for intermittent use. The recycling system stops the primary chamber becoming septic.
Question: My drain is deep can I still connect up to the ENsign Treatment plant?
Answer: Yes we can supply invert risers which cater for deeper inlet connection up to a further 1metre.
Question: Are sewage plants expensive to run? Should I look at a non electric Bio-system?
Answer: No, the power of a Marsh ENsign Six Person plant is 50w this means the running cost is approx. £52.00 per annum. Bio-systems are normally designed with a very deep outlet that can mean a pump needs to be fitted, which has a higher running cost than that of a compressor. Some need full concrete surrounds, and the layers of media in a Bio-system will need cleaning and also it requires a large separate primary chamber.
Question: Is there a sewage plant suitable for multiple dwellings or industrial sites?
Answer: The Marsh ENsign Sewage treatment plants are designed for both domestic and commercial buildings with no access to the main sewer network. We sell sewage plants up to 300 persons. Please contact us so we can prepare a quotation and Loads and Flows table that can be used to gain planning and EA/SEPA approvals.
Question: Will an unsightly lump or cover be showing in my garden, where my sewage plant would be?
Answer: No for gravity outlets the compressor is housed in the unit keeping the visual impact and any noise to an absolute minimum. For pumped outlets we recommend housing the compressor externally in a discreet “bird house design” housing that can be up to 10m from the sewage plant.
Question: How do I install the Marsh ENsign treatment unit?
Answer: The ENsign plant comes with lifting eyes to make unloading installation faster and safer.We designed the Ensign plant to self-level on the base and with our unique pipe connections ensure the installation is undertaken efficiently and correctly. The six person ENsign Sewage plant is extremely strong and is only 1.95m in depth with an inlet invert of 500mm, this design reduces both the time and cost of installation, in normal ground conditions the unit only requires a pea-shingle surround. For guidance ideally the Ensign plant should be 7m from a dwelling or10m from a stream.
ENsign Range – Warranty and Guarantee
- The minimum design life of the tank structure is twenty five years. (internally & externally)
- The compressor blower is covered by a two year guarantee.
- The diffuser is covered by a five year guarantee.
- Engineered using high performance materials.
- All metal components stainless steel.