Heat Spreader Plates can be used with both traditional or composite (I beam) joists. They are fitted from below and transmit the heat evenly across the finished floor surface. Perfect for cellars or where upper floor coverings are already in place.
Uses 15mm pipe
310mm x 1m
Easy to install
Lightweight
Quicker to install
Spreads the heat evenly when used with insulation alone
Polypipe Double Heat Spreader Plates Underfloor Heating System (fitted from below)
Product Information
Polypipe Double Heat Spreader Plates (fitted from below) is a simple installation system for traditional joists. This underfloor heating system offers the ability to fit from below even if the floor above has already been installed. Perfect for cellars or where upper floor coverings are already in place.This underfloor heating system is typically found in new build and renovation projects.
Features & Benefits of Using Double Heat Spreader Plates System (fitted from below)
Simple installation
Can be used with both traditional or composite (I beam) joists
Ability to fit even if the floor above has already been installed
Fitted within the joists and therefore does not any build height to the floor
Uses 15mm polybutylene pipe so uses fewer circuits
Specification
Heat output at 60oC water temperature: approx 52 W/M2
Maximum circuit length: 100m (15mm pipe)
Maximum coverage per circuit: 22m2 at 225mm pipe spacing (15mm pipe)
Dimensions: 450mm x 1000mm x 0.5mm
It is essential that a suitable layer of insulation material is installed directly beneath the panels so as to minimise any downward heat losses. It is recommended that the thermal resistance of this insulated layer should not be less than 0.75 m²K/W as specified in BS EN1264-4.
Please Note: It is strongly recommended that the timber floor covering is laid immediately after the underfloor heating pipes have been installed and pressure tested to eliminate any risk of damage to the system by other trades.
Either traditional tongue and groove floorboards or 18mm/22mm chipboard can be fitted directly on top of the spreader plates. These can be fixed directly through the spreader plate down into the joists below. It is important to indicate the position of pipework in areas where the additional fixing of items such as carpet grip rod or door threshold strips may be fitted at a future date. Polypipe does not recommend the application of two layers of timber floor covering as this will severely reduce the heat output of the underfloor heating system. If a manufactured timber floor is to be used then it is recommended that this be of a suitable load bearing quality.
Trading Depot currently only offer delivery to the UK.
All small stocked items are delivered direct to the customer from Trading Depot unless ordered with larger items, or FREE Click & Collect from Trading Depot is selected at the checkout.
Region
Delivery Service
Delivery Cost (Inc. VAT)
UK Mainland (England, Wales, Scotland)
Trading Depot Standard Delivery (2-4 Working Days)
£7.95
UK Scottish Highlands & Islands
Trading Depot Standard Delivery (2-4 Working Days)
£16
UK Jersey, UK Guernsey, UK Isle of Man, UK Isle of Wight, UK Isle of Scilly
Trading Depot Standard Delivery (2-4 Working Days)
£25
Special Order Items: Please note some special order items have longer lead times which are clearly indicated on the product page.
DELIVERY EXCLUSIONS
Unfortunately delivery to the following UK regions are not offered at checkout. If you would like to place an order for any regions listed below, then please contact customer services.
Excluded Regions: UK Northern Ireland.
FREE CLICK & COLLECT FROM TRADING DEPOT
FREE click and collect from Trading Depot’s warehouse in Maidenhead is also available. Simply select this option at the checkout and your items will be ready to collect in 1 – 2 working days (providing the item is in stock at the time the order is placed). You will be contacted when your order is ready to collect.
FINAL SHIPPING COST DETAILS
The delivery options on this page relates to this product only and may not be available if other items are added to your basket which are shipped from different suppliers. Only one delivery charge is made per order and the highest will normally take precedence. This is calculated based on the items in your basket at checkout.
DELIVERY WORKING DAYS & BANK HOLIDAYS
Deliveries are generally only made on working days. Working day refers to Monday to Friday and excludes weekends and Bank Holidays.
RETURNS
We offer a no quibble 14 day returns policy on all goods supplied, subject to a few minor exceptions. Returned products must be in the original packaging. View full details on our returns policy along with how to request a return.
RESTOCKING FEE
Returns for this item may be subject to a re-stocking fee.
Important Disclaimer: All delivery dates are provided as a guide and are not 'guaranteed'. We try to keep our customers as informed as possible if there are any changes or delays with delivery. Trading Depot will not be liable for any costs incurred by any such delays waiting for goods. Trading Depot advises strongly against booking Tradesmen until after goods are safely received and checked for this exact reason.
product
https://www.tradingdepot.co.uk/polypipe-fit-from-below-double-heat-spreader-plate-pack-of-5-pb2063701Polypipe Fit From Below Double Heat Spreader Plate Pack Of 5 - PB206https://www.tradingdepot.co.uk/media/catalog/product/p/b/pb206.jpg103.04108.46GBPInStock/Heating/Underfloor Heating/Water Underfloor Heating/Brands/Polypipe/Polypipe Underfloor Heating/Brands/Polypipe/Polypipe Underfloor Heating/Underfloor Heating Panels and Fixing Systems/Heating/Underfloor Heating/Water Underfloor Heating/Underfloor Heating Panels /Sale/Heating & Cooling Sale339340128415336502The Polypipe PB206 is just part of the Polyplumb Underfloor Central Heating Panels & Accessories product range available to buy from Trading Depot. <h3>Polypipe PB206 Details</h3>
Heat Spreader Plates can be used with both traditional or composite (I beam) joists. They are fitted from below and transmit the heat evenly across the finished floor surface. Perfect for cellars or where upper floor coverings are already in place.<br>
<ul>
<li>Uses 15mm pipe</li>
<li>310mm x 1m</li>
<li>Easy to install</li>
<li>Lightweight</li>
<li>Quicker to install</li>
<li>Spreads the heat evenly when used with insulation alone</li>
</ul>
<hr/>
<div class="container">
<h2>Polypipe Double Heat Spreader Plates Underfloor Heating System (fitted from below)</h2><br><br>
<div class="row">
<div class="col-sm-4">
<img src="{{media url="wysiwyg/About/CMS/double-heat-spreader-plates1.jpg"}}" alt="" />
</div>
<div class="col-sm-8">
<h3>Product Information</h3>
<p>Polypipe Double Heat Spreader Plates (fitted from below) is a simple installation system for traditional joists. This underfloor heating system offers the ability to fit from below even if the floor above has already been installed. Perfect for cellars or where upper floor coverings are already in place.This underfloor heating system is typically found in new build and renovation projects.</p>
</div>
</div>
<br>
<hr/>
<br><br>
<div class="row">
<div class="col-sm-7">
<h3>Features & Benefits of Using Double Heat Spreader Plates System (fitted from below)</h3><br>
<ul>
<li>Simple installation</li>
<li>Can be used with both traditional or composite (I beam) joists</li>
<li>Ability to fit even if the floor above has already been installed</li>
<li>Fitted within the joists and therefore does not any build height to the floor</li>
<li>Uses <u>15mm polybutylene pipe so uses fewer circuits</u></li>
</ul>
</div>
<div class="col-sm-5">
<img src="{{media url="wysiwyg/About/CMS/double-heat-spreader-plate-2.jpg"}}" alt="" />
</div>
</div><br>
<hr/>
<br><br>
<div class="row">
<div class="col-sm-4">
<img src="{{media url="wysiwyg/About/CMS/double-heat-spreader-plates-4.jpg"}}" alt="" />
</div>
<div class="col-sm-8">
<h3>Specification</h3>
<ul>
<li>Heat output at 60<sup>o</sup>C water temperature: approx 52 W/M<sup>2</sup></li>
<li>Maximum circuit length: 100m (15mm pipe)</li>
<li>Maximum coverage per circuit: 22m<sup>2</sup> at 225mm pipe spacing (15mm pipe)</li>
<li>Dimensions: 450mm x 1000mm x 0.5mm</li>
<li>It is essential that a suitable layer of insulation material is installed directly beneath the panels so as to minimise any downward heat losses. It is recommended that the thermal resistance of this insulated layer should not be less than 0.75 m²K/W as specified in BS EN1264-4.</li>
</ul>
<b>Please Note: </b>It is strongly recommended that the timber floor covering is laid immediately after the underfloor heating pipes have been installed and pressure tested to eliminate any risk of damage to the system by other trades. <br>
Either traditional tongue and groove floorboards or 18mm/22mm chipboard can be fitted directly on top of the spreader plates. These can be fixed directly through the spreader plate down into the joists below. It is important to indicate the position of pipework in areas where the additional fixing of items such as carpet grip rod or door threshold strips may be fitted at a future date. Polypipe does not recommend the application of two layers of timber floor covering as this will severely reduce the heat output of the underfloor heating system. If a manufactured timber floor is to be used then it is recommended that this be of a suitable load bearing quality.
</div>
</div>
</div>
<br>
<hr/><br><br><br>
Polypipe00https://www.tradingdepot.co.uk/media/catalog/product/p/o/polypipe-ufh-logo-specialist-stockist-1_68.jpghttps://www.tradingdepot.co.uk/media/catalog/product/3/d/3dca221198cac76151ab96d77688ec4acd0436a030a8b3226051a8eb2ab3a5eb.jpegadd-to-cartPolypipe5053062079434PB206PolypipeNewUnderfloor Heating AccessoriesSpreader PlateSuspended Floor (Fit From Below)
