Telford Tempest Solar 250 Litre Pre-Plumbed Indirect Stainless Steel Cylinder

Product Code: TSMI250/S/SPLAN
Available
Manufacturer Telford
Product Code TSMI250/S/SPLAN
MPN TSMI250/S/SPLAN
PDF Document Link tempest-solar-indirect.pdf
PDF Document Link cylinders specification sheet.pdf
£982.58 inc VAT £818.82 exc VAT

The Telford TSMI250/S/SPLAN is just part of the Telford Solar Hot Water Cylinders product range available to buy online from Trading Depot. Click here to find out more
Manufacturer Telford
Product Code TSMI250/S/SPLAN
MPN TSMI250/S/SPLAN
PDF Document Link tempest-solar-indirect.pdf
PDF Document Link cylinders specification sheet.pdf
  • Product info

    Telford TSMI250/S/SPLAN Details

    Telford cylinders are a family run business that set out to manufacture a broad range of high quality cylinders.

    With the Telford Tempest Solar cylinders UK homeowners can enjoy high energy levels generated directly from the sun. Solar radiation is absorbed and converted into heat which is supplied to outlets throughout the house. The Tempest Solar cylinder is produced from recyclable Duplex 2304 stainless steel which is corrosion resistant and wipe clean. The solar cylinders cut heat loss down to a minimum and come with a lifetime guarantee (2 years on parts).

    • Easy to install
    • Pre-plumbed to save valuable time on site for both the plumbing and electrical contractor
    • Twin Coil
    • Pressure tested to 15 Bar
    • Relief valve safety control
    • 3 Bar working pressure
    • Flow rate up to 55 ltrs/min
    • ¾″ Connections, including hot water draw off, boiler return, solar coil and cold fill
    • ½″ Temp & Pressure relief valve
    • 1¾″ Immersion heater
    • Stylish appearance
    • Lifetime guarantee
    • Manufactured in the UK

    Included With The Cylinder

    • 2 x Dual high limit stat
    • 3kW Immersion, 240V single phase
    • Expansion Veessel
    • Temperature and pressure relief
    • 3bar inlet control group
    • Two port motorized valve
    Please note Telford cylinders are made to measure and cancellations/returns are subject to up to a 35% administration fee
  • Tech Specs
    Product Code: TSMI250/S/SPLAN
    Manufacturer: Telford
    Brand: Telford
    Condition: New
    MPN: TSMI250/S/SPLAN
    Supplied With: Immersion, Expansion vessel, Limit stats, 2 port motorized valve, Temperature & Pressure relief
    Capacity (Litres): 250
    Product Type: Indirect
    Cylinder Type: Solar - Stainless Steel
    Capacity Range (litres): 150.1 +
    Reheat Time: Dependent on UV
    Cylinder Diameter: 554
    Standing Heat Loss: 2.10kW/24 Hours
    Cylinder Height: 1330
    Cylinder System: Unvented
    Connection Sizes: 1" Female BSP
  • Delivery info

    Delivery charges are calculated at the checkout. Standard delivery to England, Wales and parts of Scotland start from only £4.00 although exceptions do apply.

    More details can be found on our Delivery Information Page

    We offer a no quibble 60 day returns policy on all goods supplied, subject to a few minor exceptions such as cut cable, cylinders and toilet seats etc.

    Find out more on our Returns Policy page.