This unvented Telford TSMI400 indirect cylinder is just part of the stainless steel hot water cylinder range that is available to buy online from Trading Depot.
Formed from 2304 Duplex Stainless Steel the Telford Tempest cylinders keep heat loss to a minimum and are extremely economical to run.
Parts included:
3kW immersion heater – 240V single phase
Dual high limit stat
Expansion vessel
Temperature and pressure relief
3Bar inlet control group
two port motorized valve
1" Cold water inlet an hot water draw-off
High density insulation
WRAS approved
Temperature and pressure relief – inlet group 15mm x 15mm pressure relief – 15mm
Tundish 15mm x 22mm compression
Secondary return – standard on cylinders 200L and above
Capable of delivering up to 55litres of hot water per minute
Min recommended supply is 20 litres per min at 1.5bar
CFC and HCFC free rigid polyurethane foam
Lifetime guarantee on the cylinder and 2 years on parts
Manufactured in the UK
Cylinder Features
Immersion heater:
1¾", low noise high grade incoloy elements, safety cut outs, easy to install (installation guide included), and easy to commission
Duplex 2304:
Telford use a superior Duplex 2304 stainless steel when manufacturing the Tempest range, which is superior when compared to Duplex 2101 of which some other cylinders are produced from. The cylinder ends are precision manufactured and welded to the body, producing a strong and reliable vessel. The cylinders offer optimised composition alloy elements that has created a stronger and corrosion resistant product.
Outer casting:
A white steel with a laminated coated finish which is wipe clean and has a corrosion resistant base.
Primary Coil:
22mm continuously wound rapid recovery coil, suitable for pumped primary systems only.
Location:
Tempest stainless steel cylinders can be sited virtually anywhere in the property, but please consider clearance for any maintenance and the weight of the cylinder when full.
Please note Telford cylinders are made to measure and cancellations/returns are subject to up to a 35% administration fee
Trading Depot currently only offer delivery to the UK.
Delivery charges are calculated and displayed at checkout once a delivery post code has been entered.
Standard delivery charges to England, Wales and parts of Scotland start from only £4.00, although exceptions do apply.
We offer a no quibble 14 day returns policy on all goods supplied, subject to a few minor exceptions. Returned products must be in the original packaging. View full details on our returns policy along with how to request a return.
product
https://www.tradingdepot.co.uk/telford-tempest-indirect-400-litre-unvented-stainless-steel-cylinder20365Telford Tempest Indirect 400 Litre Unvented Stainless Steel Cylinderhttps://www.tradingdepot.co.uk/media/catalog/product/t/s/tsmi400.jpg1481.821481.82GBPInStock/Heating/Hot Water Cylinders/Brands/Telford Cylinders/Telford Stainless Steel Cylinders/Heating/Hot Water Cylinders/Unvented Indirect Cylinders/Brands/Telford Cylinders1569284522923This unvented Telford TSMI400 indirect cylinder is just part of the stainless steel hot water cylinder range that is available to buy online from Trading Depot. <h3>Telford TSMI400 Details</h3>
Formed from 2304 Duplex Stainless Steel the Telford Tempest cylinders keep heat loss to a minimum and are extremely economical to run.
<ul>
<li>Parts included:
<ul>
<li>3kW immersion heater – 240V single phase</li>
<li>Dual high limit stat</li>
<li>Expansion vessel</li>
<li>Temperature and pressure relief</li>
<li>3Bar inlet control group</li>
<li>two port motorized valve</li>
</ul></li>
<li>1" Cold water inlet an hot water draw-off</li>
<li>High density insulation</li>
<li>WRAS approved</li>
<li>Temperature and pressure relief – inlet group 15mm x 15mm pressure relief – 15mm</li>
<li>Tundish 15mm x 22mm compression</li>
<li>Secondary return – standard on cylinders 200L and above</li>
<li>Capable of delivering up to 55litres of hot water per minute</li>
<li>Min recommended supply is 20 litres per min at 1.5bar</li>
<li>CFC and HCFC free rigid polyurethane foam</li>
<li>Lifetime guarantee on the cylinder and 2 years on parts</li>
<li>Manufactured in the UK</li>
</ul>
<h4>Cylinder Features</h4>
<strong>Immersion heater:</strong> <p>1¾", low noise high grade incoloy elements, safety cut outs, easy to install (installation guide included), and easy to commission</p>
<strong>Duplex 2304:</strong> <p>Telford use a superior Duplex 2304 stainless steel when manufacturing the Tempest range, which is superior when compared to Duplex 2101 of which some other cylinders are produced from. The cylinder ends are precision manufactured and welded to the body, producing a strong and reliable vessel. The cylinders offer optimised composition alloy elements that has created a stronger and corrosion resistant product.</p>
<strong>Outer casting:</strong> <p>A white steel with a laminated coated finish which is wipe clean and has a corrosion resistant base.</p>
<strong>Primary Coil:</strong> <p>22mm continuously wound rapid recovery coil, suitable for pumped primary systems only.</p>
<strong>Location:</strong> <p>Tempest stainless steel cylinders can be sited virtually anywhere in the property, but please consider clearance for any maintenance and the weight of the cylinder when full.</p>
<b>Please note Telford cylinders are made to measure and cancellations/returns are subject to up to a 35% administration fee</b>Telford00add-to-cartTelfordTSMI400TelfordNewIndirect CylinderUnvented400 Litres