When it comes to upgrading the interior of your home, installing new internal doors can make a significant impact on both aesthetics and functionality. However, before you rush to purchase new doors, it's crucial to take accurate measurements to ensure a seamless and hassle-free installation process. In this blog post, we'll guide you through the steps of measuring for new internal doors, ensuring your project is a resounding success.
Gather the Necessary Tools:
Before you begin measuring, gather the essential tools you'll need for precise results. You'll require a measuring tape, pencil, paper, and a notepad to jot down the measurements. Having these items on hand will make the process smoother and more organised.
Measure the Height:
Start by measuring the height of your existing internal door. Place the measuring tape vertically on the left side of the door frame and extend it to the top of the frame. Note down the measurement in both inches and centimetres. Perform the same process on the right side of the frame and take the smaller of the two measurements to ensure a proper fit.
Measure the Width:
Next, measure the width of the door frame. Place the measuring tape horizontally from the top of the frame to the bottom, again recording the measurements in both inches and centimetres. Measure the width at three different points: the top, middle, and bottom of the frame. If there are any discrepancies, use the smallest width measurement to avoid potential fitting issues.
Measure the Thickness:
To determine the thickness of your existing door, measure its depth from one side to the other. This measurement is crucial for ensuring that the new door will fit correctly within the frame without any obstructions.
Consider Door Swing:
While measuring the door's width, take note of the direction the door swings. This information is vital if you plan to install a different type of door, such as a sliding or bi-fold door, as it will impact the clearance and layout of the space.
Measure for Handle and Hinge Locations:
If you're replacing an existing door and plan to reuse the current hardware, measure the distance from the top of the door to the centre of each hinge and do the same for the handle. These measurements will help you determine if your new door will align correctly with the existing hardware.
Check for Plumb and Square:
Before purchasing a new door, ensure that your door frame is plumb (vertically straight) and square (equal diagonals). Use a level to check for vertical alignment and a measuring tape to verify diagonal measurements. If your frame is out of alignment, you may need to address these issues before installing the new door.
Conclusion:
Taking accurate measurements for new internal doors is a crucial step in any renovation project. By following the steps outlined in this guide, you can ensure that your new doors will fit perfectly, enhancing the beauty and functionality of your home. Remember, precision is key, and taking the time to measure correctly will save you from unnecessary headaches down the road.
